KRASOflex 155
























KRASOflex 155
stabilised and flexible construction joint tape for installation on the upper reinforcement layer, only 3 cm of integration into the concrete required during the
first concreting step, optimal visual check due to visual control strip in different colour, with punched eyelets | DafStB waterproof concrete guideline: stress class 1 + 2
+ As stable as a joint plate - flexible like a joint tape! Thanks to the inner plastic core, the KRASOflex 155 can easily be bent and adjusted
+ For installation on the upper reinforcement layer – only 3 cm of integration into the concrete required during the first concreting step. Optimal visual check due to visual control strip in different colour
+ Including splicing set for a quick and easy splicing
+ DafStB waterproof concrete guideline: stress class 1 + 2
The joint plate made of plastic
+ As stable as a joint plate - flexible like a joint tape! Thanks to the inner plastic core, the KRASOflex 155 can easily be bent and adjusted
+ For installation on the upper reinforcement layer – only 3 cm of integration into the concrete required during the first concreting step. Optimal visual check due to visual control strip in different colour
+ Including splicing set for a quick and easy splicing
+ DafStB waterproof concrete guideline: stress class 1 + 2
Info
Scope of supply:
KRASOflex 155, splicing set consisting of plastic mounting bracket, plastic adhesive, 2 joint tape clips
KRASOflex 155, splicing set consisting of plastic mounting bracket, plastic adhesive, 2 joint tape clips
Type / Item |
KRASOflex 155 |
Roll length / width |
25 m / 150 mm |
Weight per roll |
approx. 20 kg |
KRASOflex 155 | 7,70 € per metre |
KRASOflex 155 - Stoßverbinder-Set
für KRASOflex 155, zur Erstellung weiterer StoßverbindungenDas Fugenblech aus Kunststoff+ Standfest wie ein Fugenblech – biegsam wie ein Fugenband! Durch den Innenkern aus Kunststoff lässt sich das KRASOflex 155 einfach anpassen und knicken.+ Zum Aufstellen auf die obere Bewehrungslage – nur 3 cm Einbindung beim 1. Betonierabschnitt nötig. Optimale Sichtkontrolle durch Sichtkontrollstreifen.+ Inklusive Stoßverbinder-Set zur schnellen und einfachen Herstellung von Stoßverbindungen.+ Anbindeösen erleichtern die Befestigung.+ WU-Richtlinie: Beanspruchungsklasse 1 + 2
KRASOflex AFW 150
construction joint wall element for vertical construction joints in the wall/wall joint area | DafStB waterproof concrete guideline: stress class 1 + 2
KRASOflex 155 - Stoßverbinder-Set
für KRASOflex 155, zur Erstellung weiterer StoßverbindungenDas Fugenblech aus Kunststoff+ Standfest wie ein Fugenblech – biegsam wie ein Fugenband! Durch den Innenkern aus Kunststoff lässt sich das KRASOflex 155 einfach anpassen und knicken.+ Zum Aufstellen auf die obere Bewehrungslage – nur 3 cm Einbindung beim 1. Betonierabschnitt nötig. Optimale Sichtkontrolle durch Sichtkontrollstreifen.+ Inklusive Stoßverbinder-Set zur schnellen und einfachen Herstellung von Stoßverbindungen.+ Anbindeösen erleichtern die Befestigung.+ WU-Richtlinie: Beanspruchungsklasse 1 + 2
KRASO Mounting Clamps
for joint tapes up to 20 cm highAccessories: + KRASO Mounting Clamp for the impact joint and for easy and secure installation on the upper reinforcement layer. + KRASO Mounting Clamp for precast walls for impact joints and for easy and secure installation on the upper reinforcement layer.
KRASO Sealing Strip
for joint tape corner areas, self-adhesive Accessories: + For a secure sealing of KRASO Duo-Fix "plus" and joint tape corner areas + Simply tight with self-adhesive sealing strips
Legend

Regarding our wall and pipe penetrations the KRASO 4 Seal reliably keeps pressurised water out: The material testing institute certifies a water pressure tightness up to 10 bar! Due to its construction the KRASO 4 Seal is securely fixed to the concrete. It is joined to the solid wall pipe monolithically (force-fit) in a special process. This completely prevents any creep or slippage.

Whether KRASO Pump Sumps made of concrete, Flange Plates, Tie Points or Sealing Inserts: they all offer reliable protection against pressing water due to their construction, material and processing. All these products have been tested by independent material testing institutes regarding their water pressure tightness and are proof against pressurised water up to 10 bar!

Not only against pressing water — KRASO Sealing Inserts are additionally gas- and odour-tight and therefore high-quality in terms of TA-Air! Due to a successful proof in a material testing institute our sealing inserts include the administrative regulation of the Federal Immission Control Act: “Technical Instructions on Air Quality Control TA-Air”.

Products with Torque Control Nut KRASO DKM can be installed without having to use a torque wrench. The correct torque moment is integrated in the KRASO DKM. The installation has never been so easy and installation errors can be avoided.

Radon (Rn) is a radio-active noble gas which develops in rock earth. Via ground air this colour- and odourless gas can enter basement rooms through leakages. Radon is the second most common cause for lung cancer. Pipe penetrations with KRASO 4 Seal and KRASO Sealing Inserts are gas tight and therefore reliably protect your building against the intrusion of radon.

The DVGW — The German Technical and Scientific Association for Gas and Water - certified that KRASO Sealing Inserts are gas-tight according to DIN EN13611 (sector 7.2). Our sealing inserts therefore meet the criteria for the German Association for Gas and Water.

The KRASO Builder's Convenience Box has the application from DVGW - German Technical and Scientific Association for Gas and Water - according DVGW VP 601 as house connection for gas and water and therefore fulfils all directives for a gas- and water pressure tight installation.

The so-called “fire-resistance grading” gives information about the DIN normed fire resistance of building materials. The grading shows the letter ”F” along with the time span of the functional integrity in minutes. With 180 minutes of functional integrity the fire-resistance grading F 180 therefore stands for a highly- fire-resistant material.

Test certificates from recognised material testing institutes verify the usability of KRASO Joint Tapes, as e.g. KRASO Duo-Fix 150 “plus”, according the guidelines of the German Institute for Structural Engineering. The test certificate proofs the usability according state building regulations.

KRASO Products with a "FHRK Quality" – icon meet the testing specifications of FHRK e.V. - the trade association for house connections for pipes and cables. The tests cover all possible stresses on sealing inserts, house connection systems, pipe penetrations and casings: for example, gas- and water pressure tightness, abrasion resistance when backfilling formwork or resistance when compacting the building pit.

KRASO Products with the icon "FHRK Radondicht" have been tested according FHRK or/and DVGW testing specifications regarding their gas- and water pressure tightness and have also been successfully tested for diffusion resistance by the IAF. Products with this seal are radon-tight!