KRASO Inject FR
KRASO Inject FR
wall penetration for the connection of KG/KG 2000 pipes, with injection system | DIN 18533 W2.1 -E, DafStB waterproof concrete guideline: stress class 1 + 2
The inject wall penetration with flow direction (FR) for existing buildings
+ Quick and easy to install wall penetration for e.g. sewage pipes
+ One flow direction! Including pipe with sleeve and spigot for the connection of KG/KG 2000 pipes
+ Suitable for all common types of walls - also for hollow bricks
+ With sealing flange for exterior sealing ("black tank")
+ Ideal for rehabilitation and new connections in existing buildings
+ Integrated torque control (IDK) - no torque wrench required
+ Injection system with fast-curing expansion resin
+ Gas and water pressure tight up to 1 bar
+ DIN 18533 W2.1 -E ("moderate impact of pressing water")
+ DafStB waterproof concrete guideline: stress class 1 + 2
Info
Further diameters and wall thicknesses available on request!
Downloads
KRASO Injekt FR
|
Type / Item |
KRASO Inject FR |
|
|
Diameter DN |
110 |
160 |
|
Wall thickness in mm from … to …* |
200 - 400 |
|
|
Diameter core drilling min … max … in mm |
149 - 153 |
199 - 203 |
|
External diameter sealing flange in mm |
250 |
300 |
|
Length KG pipe* in cm |
50 |
|
|
KRASO Inject FR |
295 € |
425 € |
|
* Extendable on-site |
||
KRASO Sealing Insert Universal DD/M
for simultaneous installation of up to 5 cables or pipes,
double sealing against pressing water up to 3 bar, Torque Control Nut KRASO DKM,
non-corrosive stainless steel V2A, 40 mm seal. Can also be used as blind plug
until later installation of pipes or cables | DafStB waterproof concrete
guideline: stress class 1 + 2
Simple, tight, universal use
+ For core drillings or casings
+ Onion ring technology: universal use for various
external diameters of media pipes or cables!
+ KRASO Sealing Insert quality: non-corrosive stainless
steel V2A, high quality 40 mm rubber seal, welded-on studs instead of
through bolts
+ Torque Control Nut KRASO DKM:
integrated torque limiter - no torque wrench required!
+ MPA-tested: protects reliably against
pressing water up to 3 bar!
+ Gas- and odour-tight – high-quality in terms
of TA-Air!
+ Radon tightness IAF tested - meets the requirements for
radon precautionary areas according to FHRK leaflet MB 101!
+ Certified with the quality seal of the FHRK e. V.
+ DafStB waterproof concrete guideline: stress class 1 +
2
KRASO Inject FE
recess for retrofit installation of cables and pipes using a sealing insert (not included in the scope of supply), with injection system | DIN 18533 W2.1 -E, DafStB waterproof concrete guideline: stress class 1 + 2The true diameter inject casing for existing buildings+ Thick-walled true diameter casing for retrofit installation+ Fast and easy installation: injection system with fast-curing expansion resin+ Suitable for all common types of walls - also for hollow bricks+ With sealing flange for exterior sealing ("black tank")+ Ideal for rehabilitation and new connections in existing buildings+ Integrated torque control (IDK) - no torque wrench required+ For the sealing of cables or pipes using a sealing insert (not included in the scope of supply): e.g. KRASO Sealing Insert Type ED+ Gas and water pressure tight up to 1 bar+ DIN 18533 W2.1 -E ("moderate impact of pressing water")+ DafStB waterproof concrete guideline: stress class 1 + 2
KRASO Inject LR
empty pipe as recess for retrofit installation of cables and pipes using a casing pipe end plug (electricity/water, telecommunication or fibreglass), with injection system | DIN 18533 W2.1 -E, DafStB waterproof concrete guideline: stress class 1 + 2Empty pipe as retrofit wall penetration for existing buildings+ Empty pipe for retrofit installation+ Fast and easy installation: injection system with fast-curing expansion resin+ Suitable for all common types of walls - also for hollow bricks+ With sealing flange for exterior sealing ("black tank")+ Ideal for rehabilitation and new connections in existing buildings+ Integrated torque control (IDK) - no torque wrench required+ With option to connect casing pipes+ Casing pipe end plugs for electricity/water, telecommunication or fibreglass+ Gas and water pressure tight up to 1 bar+ DIN 18533 W2.1 -E ("moderate impact of pressing water")+ DafStB waterproof concrete guideline: stress class 1 + 2
