KRASO Flange Pipe Type FE

InternalDiameter ID

100

125

150

200

250

300

KRASO Flange Pipe Type FE

thick-walled true diameter plastic casing for retrofit installation of pipes and cables using KRASO Sealing Insert (not ioncluded in the delivery), with formed KRASO Foil Flange, oil- and bitumen resistant, surrounding approx. 15 cm. For the integration of the foil flange we recommend our adhesive and sealant KRASO PU 50.
ID = InternalDiameter Flange Pipe Type FE
| DIN 18533 W1-E and W2.1-E

Simple and effective integration into bituminous sealing

+ For new building and rehabilitation - according DIN 18533 W1-E and W2.1-E.

+ Simple and effective integration into bituminous sealing („black tank“): bitumen thick coating (e.g. KMB) and sheeting, concrete and brick wall.

+ Water pressure tight up to 1,5 bar – MPA-tested!

+ Made of dimensionally and pressure stable solid wall material with low abrasion! Easy to install at low temperatures.

Info

Scope of supply:

KRASO Flange Pipe Type FE

Downloads

Produktinformation

Produktinfo_KRASO_Flanschrohre (3.22 MiB)

Datenblatt

Datenblatt_KRASO_Flanschrohr_Typ_FE (231.5 KiB)
Data Sheet_KRASO_Flange_Pipe_Type_FE (451.02 KiB)

Prüfzeugnis

Prüfbericht_KRASO_Flanschrohr (1.82 MiB)

Montageanleitung

Montageanleitung_KRASO_Flanschrohr_Typ_FE (1.51 MiB)

DWG-Dateien

DWG_KRASO_Flanschrohr_Typ_FE_ID_250 (316.35 KiB)

Type / Item	KRASO Flange Pipe Type FE
InternalDiameter ID	100	125	150	200	250	300
External diameter in mm	110	140	160	210	263	314
Delivery length in cm	50

Downloads auf ausschreiben.de

KRASO PU 50

high-quality, permanently elastic and strong PU-sealant, also suitable on moist surface, recommended for all products with KRASO Foil Flange, colour black

KRASO Casing Type FBV-FE - casing true diameter

thick-walled plastic casing for a conformist integration of FBV-films, for concreting with fresh concrete composite film on the part of the building site, using the 20 cm sourrounding, angular FBV-sealing flange, Torque Control Nut KRASO DKM, incl. frame for an easy fixation, colour grey, as a recess for later installation of pipes or cables using KRASO Sealing Insert (not included in the delivery), with water pressure-, gas- and odour-tight, surrounding KRASO 4 Seal and 2 KRASO Covers as an installation aidID = InternalDiameter true diameter casing | DafStB waterproof concrete guidline: Stress class 1 + 2 The casing for FBV integration + Casing for a conformist integration of fresh concrete composite films. + Vendor independence: fresh concrete compound foils (FBV) of all vendors can be integrated. + KRASO FBV-Sealing Flange made of non-corrosive stainless steel V2A with angular fresh concrete composite film, surrounding 20 cm. + Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ Thick-walled plastic casing - true diameter - for concreting: as a recess for later installation of pipes or cables using KRASO Sealing Insert! + With water pressure tight surrounding KRASO 4 Seal - certified and tested: due to the special geometry our surrounding 4 Seal produces a grip with the concrete that is water-, gas- and odour-tight. + Materials and processing: KRASO Casings are made of weatherproof, high-impact plastic. The surrounding KRASO 4 Seal is joined monolithically to the plastic pipe by vulcanization.+ IAF tested: Radon-tight!+ Tested according to FHRK test specification GE 120! + DafStB waterproof concrete guidline: Stress class 1 + 2

KRASO Type KMB - KG 2000

plug-in flange, for retrofit sealing of KG 2000 - pipes using KRASO Foil Flange with bitumen thick coating e.g. KMB, with formed plug-in sleeve on one side and KRASO Foil Flange, oil- and bitumen resistant, surrounding approx. 6 cm. For the integration of the foil flange we recommend our adhesive and sealant KRASO PU 50. | DIN 18533 W1-E and W2.1-E Simple and effective integration into bituminous sealing+ For new building and rehabilitation - according DIN 18533 W1-E and W2.1-E. + Simple and effective integration into bituminous sealing (“black tank“): bitumen thick coating (e.g. KMB) and sheeting, concrete and brick wall. + Water pressure tight up to 1,5 bar - MPA-tested! + Made of dimensionally and pressure stable solid wall material with low abrasion! Easy to install at low temperatures.+ Pipe and pipe material in accordance with DIN EN 1401 (KG) or DIN EN 14758 (KG 2000).

KRASO Type KMB

plug-in flange, for retrofit sealing of KG/HT pipes using KRASO Foil Flange with bitumen thick coating e.g. KMB, with formed plug-in sleeve on one side and KRASO Foil Flange, oil- and bitumen resistant, surrounding approx. 6 cm. For the integration of the foil flange we recommend our adhesive and sealant KRASO PU 50. | DIN 18533 W1-E and W2.1-ESimple and effective integration into bituminous sealing + For new building and rehabilitation - according DIN 18533 W1-E and W2.1-E.+ Simple and effective integration into bituminous sealing (“black tank“): bitumen thick coating (e.g. KMB) and sheeting, concrete and brick wall. + Water pressure tight up to 1,5 bar - MPA-tested! + Made of dimensionally and pressure stable solid wall material with low abrasion! Easy to install at low temperatures.+ Pipe and pipe material in accordance with DIN EN 1401 (KG) or DIN EN 14758 (KG 2000).

KRASO Flange Pipe Type KG 2000

for retrofit installation, for the connection to KG 2000 lines, made of high-quality, dimensionally and pressure stable solid wall material, with formed plug-in sleeve on one side and KRASO Foil Flange, oil- and bitumen resistant, surrounding approx. 15 cm. For the integration of the foil flange we recommend our adhesive and sealant KRASO PU 50. | DIN 18533 W1-E and W2.1-E Simple and effective integration into bituminous sealing+ For new building and rehabilitation - according DIN 18533 W1-E and W2.1-E.+ Simple and effective integration into bituminous sealing (“black tank“): bitumen thick coating (e.g. KMB) and sheeting, concrete and brick wall.+ Water pressure tight up to 1,5 bar - MPA-tested!+ Made of dimensionally and pressure stable solid wall material with low abrasion! Easy to install at low temperatures.+ Pipe and pipe material in accordance with DIN EN 1401 (KG) or DIN EN 14758 (KG 2000).

KRASO Flange Pipe Type KG

for retrofit installation, for connection to KG/HT lines, made of high-quality, dimensionally and pressure stable solid wall material, with formed plug-in sleeve on one side and KRASO Foil Flange, oil- and bitumen resistant, surrounding approx. 15 cm. For the integration of the foil flange we recommend our adhesive and sealant KRASO PU 50. | DIN 18533 W1-E and W2.1-ESimple and effective integration into bituminous sealing + For new building and rehabilitation - according DIN 18533 W1-E and W2.1-E. + Simple and effective integration into bituminous sealing (“black tank“): bitumen thick coating (e.g. KMB) and sheeting, concrete and brick wall. + Water pressure tight up to 1,5 bar - MPA-tested! + Made of dimensionally and pressure stable solid wall material with low abrasion! Easy to install at low temperatures.+ Pipe and pipe material in accordance with DIN EN 1401 (KG) or DIN EN 14758 (KG 2000).