KRASO Desired Crack Elements
KRASO Desired Crack Elements
universal application in the corner- and joint area of wall elements
Secure sealing of corner- and joint areas
+ KRASO FTW 60 (desired crack element for precast walls) and KRASO OBW 88 (desired crack element for in situ concrete walls): for the universal application in the corner- and joint area of wall elements.
+ KRASO FTW 60 (desired crack element for precast walls) and KRASO OBW 88 (desired crack element for in situ concrete walls): for the universal application in the corner- and joint area of wall elements.
Info
Scope of supply:
KRASO Desired Crack Elements FTW 60 / OBW 88 incl. 50 cm fixing thigh and 2 pieces KRASO Mounting Clamps for easy fixing
KRASO Desired Crack Elements FTW 60 / OBW 88 incl. 50 cm fixing thigh and 2 pieces KRASO Mounting Clamps for easy fixing
Downloads
Produktinformation
Prüfzeugnis
DWG-Dateien
-
Produktinfo_KRASOflex_Sternrohr (2.51 MiB)
-
Prüfbericht_KRASO_Duo_Fix_150_plus (5.91 MiB)
-
Prüfbericht_KRASO_Sternrohre (7.7 MiB)
-
DWG_KRASOflex_Sternrohr_System_FTW_60_(_2,5m_) (371.98 KiB)
Type / Item |
Desired Crack Elements FTW 60 / OBW 88 |
|||||||
Length |
1,50 m |
2,00 m |
2,50 m |
3,00 m |
3,50 m |
4,00 m |
4,50 m |
5,00 m |
KRASO AFW 150
construction joint wall element for vertical construction joints in the joint area wall/wallSecure sealing of corner- and joint areas + KRASO AFW 150 (construction joint wall element) for vertical construction joints in the joint area wall/wall.+ Simply put it over the installed KRASO Duo-Fix 150 "plus" and fix it in place with the KRASO Mounting Clamps supplied. On-side cutting isn´t necessary!
KRASOflex® 155
Stabilised construction joint tape which can easily be adapted and bent to install on the upper reinforcement layer. At the first concreting step is an integration of only 3 cm required, optimal control with visual control strips and punched eyeletsThe joint tape made of plastic material+ As firm as a joint plate - flexible like a joint tape! KRASOflex 155 can easily be adapted and bent due to the inner core of plastic material.+ For installation on the upper reinforcement layer - at the first concreting step is an incorporation of only 3 cm required. Optimal control with visual control strips.+ Including butt connector set for quick and easy creation of joints.+ Punched eyelets facilitate the installation.
KRASO Duo-Fix 150 “plus“
stable construction joint tape to install on the upper reinforcement layer, at the first concreting step is an incorporation of only 3 cm required, optimal visual control with the difference in colour, with punched eyeletsThe technical high-quality construction joint tape+ As firm as a joint plate - flexible like a joint tape! KRASO Duo-Fix 150 "plus" can easily be adapted and bent due to the inner core of perforated sheet.+ For installation on the upper reinforcement layer - at the first concreting step is an incorporation of only 3 cm required. Optimal visual control with the difference in colour.+ Splicing can be easily created with the KRASO Sealing Strips at the construction site.+ Easy fixation due to punched eyelets.
KRASOflex® 155
stabilised and flexible construction joint tape for installation on the upper reinforcement layer, only 3 cm of integration into the concrete required during the
first concreting step, optimal visual check due to visual control strip in different colour, with punched eyelets | DafStB waterproof concrete guideline: stress class 1 + 2
The joint plate made of plastic + As stable as a joint plate - flexible like a joint tape!
Thanks to the inner plastic core,
the KRASOflex 155 can easily be bent and adjusted+
For installation on the upper reinforcement layer – only 3 cm of integration into the concrete required during the
first concreting step. Optimal visual check due to visual control strip in different colour+
Including splicing set for a quick and easy splicing+
DafStB waterproof concrete guideline: stress class 1 + 2
KRASO Mounting Clamps
for joint tapes up to 20 cm highAccessories: + KRASO Mounting Clamp for the impact joint and for easy and secure installation on the upper reinforcement layer. + KRASO Mounting Clamp for precast walls for impact joints and for easy and secure installation on the upper reinforcement layer.
KRASO Sealing Strip
for joint tape corner areas, self-adhesive Accessories: + For a secure sealing of KRASO Duo-Fix "plus" and joint tape corner areas + Simply tight with self-adhesive sealing strips
Legend
Regarding our wall and pipe penetrations the KRASO 4 Seal reliably keeps pressurised water out: The material testing institute certifies a water pressure tightness up to 10 bar! Due to its construction the KRASO 4 Seal is securely fixed to the concrete. It is joined to the solid wall pipe monolithically (force-fit) in a special process. This completely prevents any creep or slippage.
Whether KRASO Pump Sumps made of concrete, Flange Plates, Tie Points or Sealing Inserts: they all offer reliable protection against pressing water due to their construction, material and processing. All these products have been tested by independent material testing institutes regarding their water pressure tightness and are proof against pressurised water up to 10 bar!
Not only against pressing water — KRASO Sealing Inserts are additionally gas- and odour-tight and therefore high-quality in terms of TA-Air! Due to a successful proof in a material testing institute our sealing inserts include the administrative regulation of the Federal Immission Control Act: “Technical Instructions on Air Quality Control TA-Air”.
Products with Torque Control Nut KRASO DKM can be installed without having to use a torque wrench. The correct torque moment is integrated in the KRASO DKM. The installation has never been so easy and installation errors can be avoided.
Radon (Rn) is a radio-active noble gas which develops in rock earth. Via ground air this colour- and odourless gas can enter basement rooms through leakages. Radon is the second most common cause for lung cancer. Pipe penetrations with KRASO 4 Seal and KRASO Sealing Inserts are gas tight and therefore reliably protect your building against the intrusion of radon.
The DVGW — The German Technical and Scientific Association for Gas and Water - certified that KRASO Sealing Inserts are gas-tight according to DIN EN13611 (sector 7.2). Our sealing inserts therefore meet the criteria for the German Association for Gas and Water.
The KRASO Builder's Convenience Box has the application from DVGW - German Technical and Scientific Association for Gas and Water - according DVGW VP 601 as house connection for gas and water and therefore fulfils all directives for a gas- and water pressure tight installation.
The so-called “fire-resistance grading” gives information about the DIN normed fire resistance of building materials. The grading shows the letter ”F” along with the time span of the functional integrity in minutes. With 180 minutes of functional integrity the fire-resistance grading F 180 therefore stands for a highly- fire-resistant material.
Test certificates from recognised material testing institutes verify the usability of KRASO Joint Tapes, as e.g. KRASO Duo-Fix 150 “plus”, according the guidelines of the German Institute for Structural Engineering. The test certificate proofs the usability according state building regulations.
KRASO Products with a "FHRK Quality" – icon meet the testing specifications of FHRK e.V. - the trade association for house connections for pipes and cables. The tests cover all possible stresses on sealing inserts, house connection systems, pipe penetrations and casings: for example, gas- and water pressure tightness, abrasion resistance when backfilling formwork or resistance when compacting the building pit.
KRASO Products with the icon "FHRK Radondicht" have been tested according FHRK or/and DVGW testing specifications regarding their gas- and water pressure tightness and have also been successfully tested for diffusion resistance by the IAF. Products with this seal are radon-tight!