KRASO Casing Type FBV-FE
slide 2 of 3
slide 1 to 3 of 3
KRASO Casing Type FBV-FE
thick-walled plastic casing for a compliant integration of FBV films | DafStB waterproof concrete guideline: stress class 1 + 2
+ IAF tested: radon-tight!
+ Certified with the quality seal of the FHRK e. V.
The casing for FBV integration
+ Casing for a compliant integration of fresh concrete composite films
+ Independent from the manufacturer: fresh concrete composite films (FBV) of all manufacturers can be integrated at the factory
+ KRASO FBV Sealing Flange made of non-corrosive stainless steel V2A with 20 cm surrounding, square fresh concrete composite film
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!
+ The thick-walled true diameter plastic casing for concreting: as a recess for retrofit installation of cables or pipes using a sealing insert!
+ With water pressure tight surrounding KRASO 4 Seal - certified and approved: due to the special geometry, the 4 Seal produces a water pressure, gas- and odour-tight grip with the concrete
+ Materials and processing: KRASO Casings are made of weatherproof and impact resistant plastic. The surrounding KRASO 4 Seal is joined monolithically to the plastic pipe by vulcanization.
+ IAF tested: radon-tight!
+ Certified with the quality seal of the FHRK e. V.
+ DafStB waterproof concrete guideline: stress class 1 + 2
Info
Scope of supply:
KRASO Casing Type FBV-FE, 2 KRASO Covers as an installation aid, KRASO FBV Sealing Flange with 20 cm surrounding, square fresh concrete composite film
KRASO Casing Type FBV-FE, 2 KRASO Covers as an installation aid, KRASO FBV Sealing Flange with 20 cm surrounding, square fresh concrete composite film
Further diameters and wall thicknesses available on request!
Downloads
KRASO Futterrohr Typ FBV-FE - Futterrohr Echtmaß
|
Type / Item |
KRASO Type FBV-FE |
|||||
|
InternalDiameter ID |
100 |
125 |
150 |
200 |
250 |
300 |
|
Available standard wall thicknesses in cm |
20 · 24 · 25 · 30 · 35 · 36,5 · 40 · 45 · 50 |
|||||
|
KRASO Type FBV-FE |
245 € |
302 € |
304 € |
418 € |
564 € |
638 € |
slide 1 of 1
KRASO Casing Type E/FE - stainless steel/true diameter casing
stainless steel casing for concreting, as a recess for retrofit installation of pipes and cables using a sealing insert (not included in the scope of supply), made of non-corrosive stainless steel V2A, with water pressure tight, gas- and odour-tight, surrounding KRASO 4 Seal and 2 KRASO Covers as an installation aid, ID = InternalDiameter true diameter casing | DafStB waterproof concrete guideline: stress class 1 + 2
For all diameters!+ Thick-walled true diameter casings for concreting+ KRASO 4 Seal - MPA-tested up to 10 bar! Gas- and odour-tight - high quality in terms of TA-Air!+ IAF-tested: radon tight!+ Certified with the quality seal of the FHRK e. V.+ Material and processing: weatherproof, impact-resistant plastic, KRASO 4 Seal joined monolithically to the plastic pipe by vulcanization+ Every diameter and every wall thickness available at short notice! If necessary the size can be adapted individually on the construction-site!+ Low weight: easy handling, simple installation, low transport costs!+ Including installation covers! No pre-treatment required!+ DafStb waterproof concrete guideline: stress class 1 + 2
slide 1 to 2 of 2
KRASO Sealing Insert Type SD
for installation of pipes or cables, Torque Control Nut KRASO DKM*KRASO Type SD 30 / KRASO Type SD 30 - T, split / KRASO Type SD 30 - GF, large flangeKRASO Type SD 60 / KRASO Type SD 60 - T, split / KRASO Type SD 60 - GF, large flange
| DafStB waterproof concrete guideline: stress class 1 + 2
The solution for special situations+ For core drillings and casings+ Individual and custom-made solution: with large flange or split!+ KRASO Sealing Insert quality: 5 mm thick clamping plates made of non-corrosive stainless steel V2A, 30 or 60 mm seal made of a specially developed rubber mixture, welded-on studs instead of through bolts
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ MPA-tested: protects reliably against pressing water up to 2,5 / 5 bar!+ Gas and odour tight - High-quality in terms of TA-Air!+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101!
+ Certified with the quality seal of the FHRK e. V.+ With arrangement template: see the arrangement at a glance!+ Generally available within 24 hours!+ Available at an additional charge: stainless steel V4A / KTW - recommendation / NBR - oil- and petrol resistant / temperature resistant up to 220°C+ DafStB waterproof concrete guideline: stress class 1 + 2
Configure Sealing Insert
KRASO Sealing Insert Universal DD
for installation of pipes or cables, double sealing against
pressing water up to 3 bar. Can also be used as blind plug for feed-through of
pipes or cables (except KRASO Universal 250 DD and Universal 250 DD/T) | DafStB
waterproof concrete guideline: stress class 1 + 2Simple, tight, universal use
+ For core drillings or casings
+ Onion ring technology: universal use for various external
diameters of media pipes or cables!
+ KRASO Sealing Insert quality: non-corrosive stainless
steel V2A, high quality 40 mm rubber seal, welded-on studs instead of through bolts
+ Torque Control Nut KRASO DKM: integrated torque limiter -
no torque wrench required!
+ MPA-tested: protects reliably against pressing water up to
3 bar!
+ Gas- and odour-tight – high-quality in terms of TA-Air!
+ Radon tightness IAF tested - meets the requirements for
radon precautionary areas according to FHRK leaflet MB 101!
+ Certified with the quality seal of the FHRK e. V.
+ DafStB waterproof concrete guideline: stress class 1 + 2
