KRASO Casing Type FBV-FE
KRASO Casing Type FBV-FE
thick-walled plastic casing for a compliant integration of FBV films | DafStB waterproof concrete guideline: stress class 1 + 2
+ IAF tested: radon-tight!
+ Certified with the quality seal of the FHRK e. V.
The casing for FBV integration
+ Casing for a compliant integration of fresh concrete composite films
+ Independent from the manufacturer: fresh concrete composite films (FBV) of all manufacturers can be integrated at the factory
+ KRASO FBV Sealing Flange made of non-corrosive stainless steel V2A with 20 cm surrounding, square fresh concrete composite film
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!
+ The thick-walled true diameter plastic casing for concreting: as a recess for retrofit installation of cables or pipes using a sealing insert!
+ With water pressure tight surrounding KRASO 4 Seal - certified and approved: due to the special geometry, the 4 Seal produces a water pressure, gas- and odour-tight grip with the concrete
+ Materials and processing: KRASO Casings are made of weatherproof and impact resistant plastic. The surrounding KRASO 4 Seal is joined monolithically to the plastic pipe by vulcanization.
+ IAF tested: radon-tight!
+ Certified with the quality seal of the FHRK e. V.
+ DafStB waterproof concrete guideline: stress class 1 + 2
Info
Scope of supply:
KRASO Casing Type FBV-FE, 2 KRASO Covers as an installation aid, KRASO FBV Sealing Flange with 20 cm surrounding, square fresh concrete composite film
KRASO Casing Type FBV-FE, 2 KRASO Covers as an installation aid, KRASO FBV Sealing Flange with 20 cm surrounding, square fresh concrete composite film
Further diameters and wall thicknesses available on request!
Downloads
|
Type / Item |
KRASO Type FBV-FE |
|||||
|
InternalDiameter ID |
100 |
125 |
150 |
200 |
250 |
300 |
|
Available standard wall thicknesses in cm |
20 · 24 · 25 · 30 · 35 · 36,5 · 40 · 45 · 50 |
|||||
|
KRASO Type FBV-FE |
245 € |
302 € |
304 € |
418 € |
564 € |
638 € |
KRASO Casing Type E/FE - stainless steel/true diameter casing
stainless steel casing for concreting, as a recess for retrofit installation of pipes and cables using a sealing insert (not included in the scope of supply), made of non-corrosive stainless steel V2A, with water pressure tight, gas- and odour-tight, surrounding KRASO 4 Seal and 2 KRASO Covers as an installation aid, ID = InternalDiameter true diameter casing | DafStB waterproof concrete guideline: stress class 1 + 2
For all diameters!+ Thick-walled true diameter casings for concreting+ KRASO 4 Seal - MPA-tested up to 10 bar! Gas- and odour-tight - high quality in terms of TA-Air!+ IAF-tested: radon tight!+ Certified with the quality seal of the FHRK e. V.+ Material and processing: weatherproof, impact-resistant plastic, KRASO 4 Seal joined monolithically to the plastic pipe by vulcanization+ Every diameter and every wall thickness available at short notice! If necessary the size can be adapted individually on the construction-site!+ Low weight: easy handling, simple installation, low transport costs!+ Including installation covers! No pre-treatment required!+ DafStb waterproof concrete guideline: stress class 1 + 2
KRASO Sealing Insert Type SD
for installation of pipes or cables, Torque Control Nut KRASO DKM*KRASO Type SD 30 / KRASO Type SD 30 - T, split / KRASO Type SD 30 - GF, large flangeKRASO Type SD 60 / KRASO Type SD 60 - T, split / KRASO Type SD 60 - GF, large flange
| DafStB waterproof concrete guideline: stress class 1 + 2
The solution for special situations+ For core drillings and casings+ Individual and custom-made solution: with large flange or split!+ KRASO Sealing Insert quality: 5 mm thick clamping plates made of non-corrosive stainless steel V2A, 30 or 60 mm seal made of a specially developed rubber mixture, welded-on studs instead of through bolts
+ Torque Control Nut KRASO DKM: integrated torque limiter - no torque wrench required!+ MPA-tested: protects reliably against pressing water up to 2,5 / 5 bar!+ Gas and odour tight - High-quality in terms of TA-Air!+ Radon tightness IAF tested - meets the requirements for radon precautionary areas according to FHRK leaflet MB 101!
+ Certified with the quality seal of the FHRK e. V.+ With arrangement template: see the arrangement at a glance!+ Generally available within 24 hours!+ Available at an additional charge: stainless steel V4A / KTW - recommendation / NBR - oil- and petrol resistant / temperature resistant up to 220°C+ DafStB waterproof concrete guideline: stress class 1 + 2
Configure Sealing Insert
KRASO Sealing Insert Universal DD
for installation of pipes or cables, double sealing against
pressing water up to 3 bar. Can also be used as blind plug for feed-through of
pipes or cables (except KRASO Universal 250 DD and Universal 250 DD/T) | DafStB
waterproof concrete guideline: stress class 1 + 2Simple, tight, universal use
+ For core drillings or casings
+ Onion ring technology: universal use for various external
diameters of media pipes or cables!
+ KRASO Sealing Insert quality: non-corrosive stainless
steel V2A, high quality 40 mm rubber seal, welded-on studs instead of through bolts
+ Torque Control Nut KRASO DKM: integrated torque limiter -
no torque wrench required!
+ MPA-tested: protects reliably against pressing water up to
3 bar!
+ Gas- and odour-tight – high-quality in terms of TA-Air!
+ Radon tightness IAF tested - meets the requirements for
radon precautionary areas according to FHRK leaflet MB 101!
+ Certified with the quality seal of the FHRK e. V.
+ DafStB waterproof concrete guideline: stress class 1 + 2
